Fishman AURA User Manual Page 17

  • Download
  • Add to my manuals
  • Print
  • Page
    / 36
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 16
You can choose how the Aura changes programs in Play Mode
Instant Change Mode (factory default)
In the Instant Change Mode the program changes as soon as you hit the up or down footswitch.
TO ENABLE: Hold down the right footswitch for over 2 seconds, while plugging in
9V power plug. The prompt will appear in the display.
Pre-select Change Mode
In the pre-select change mode, you can continue playing in one program while you scroll through to
the next program with the up and down footswitches. Hit the Up or Down footswitch and the LEDs
above them will start flashing Once you find the program you are looking for, hit the Feedback Cancel
footswitch and you will switch to the new program. Note that you have about three seconds after you
take your foot off the program change switch to hit the Feedback Cancel and switch to the new
program. Otherwise the program reverts to where it was when you started.
TO ENABLE: Hold down the middle footswitch for over 2 seconds while plugging
in 9V power plug. The prompt will appear in the display.
NOTE: Once enabled, “Pre-select Change” will be the normal operating state for
the up/down footswitches.
Resetting the Aura to Factory Specs
You can easily return all the programs in the Play mode to the original factory settings with
these 3 easy steps:
1 Unplug the 9VDC plug at the back of the Aura.
2 Hold down the two outside footswitches and insert the power plug into the unit.
3 Continue to hold down the outside footswitches until the prompt appears in the
display
Note: Sound Images downloaded from www.fishmanaura.com will not be replaced by
original Factory Sound Images.
Effect on/off Switch
The Effect on/off lets you bypass the blended sound image/pickup mixes in both the Play and Edit
modes, so that only the basic pickup signal from your instrument appears at the Aura's outputs. Use
the Effect on/off switch to help set baseline levels for your mixes (see page 22) and to compare your
raw pickup sound to the processed sound.
The green indicates that the effect is on.
17
Inner Workings - continued
88
88
Aura
Acoustic Imaging Blender
Page view 16
1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 35 36

Comments to this Manuals

No comments